Products
PFRED POLINOX Unitized Wheels PNER – Angle Grinders and Fillet Weld Grinders
Type for straight grinders, flexible shafts and bench grinders:
Particularly suitable for work on smaller surfaces.
Type for speed-adjustable angle grinders and fillet weld grinders:
They are especially suitable for work on fillet welds and very hard-to-reach slots or indentations.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
Description
Type for straight grinders, flexible shafts and bench grinders:
Particularly suitable for work on smaller surfaces.
Type for speed-adjustable angle grinders and fillet weld grinders:
They are especially suitable for work on fillet welds and very hard-to-reach slots or indentations.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Zinc
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | AAA028c010 |
| eclass 8.1 | 21011315 |
| eclass 7.0 | 21011390 |
| eclass 4.1 | 21011313 |
Recommendations for use
- Grinding wheels with a diameter of 150 mm can also be used on bench grinders, for reworking surgical instruments, for example.
Specifications
Technical information
| Opt. RPM from | 4500 RPM |
| Max. RPM | 6100 RPM |
| Dia. | 125 mm |
| Width | 6 mm |
| Centre hole dia. | 22.23 mm |
| Grit size | coarse |
| Abrasives | A |
| Type | H (hard) |
| Packing unit | 5 pcs. |
| Material number | 44691053 |
Enquiry about PFRED POLINOX Unitized Wheels PNER - Angle Grinders and Fillet Weld Grinders
Description
Description
Type for straight grinders, flexible shafts and bench grinders:
Particularly suitable for work on smaller surfaces.
Type for speed-adjustable angle grinders and fillet weld grinders:
They are especially suitable for work on fillet welds and very hard-to-reach slots or indentations.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Zinc
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | AAA028c010 |
| eclass 8.1 | 21011315 |
| eclass 7.0 | 21011390 |
| eclass 4.1 | 21011313 |
Recommendations for use
- Grinding wheels with a diameter of 150 mm can also be used on bench grinders, for reworking surgical instruments, for example.
Specifications
Technical information
| Opt. RPM from | 4500 RPM |
| Max. RPM | 6100 RPM |
| Dia. | 125 mm |
| Width | 6 mm |
| Centre hole dia. | 22.23 mm |
| Grit size | coarse |
| Abrasives | A |
| Type | H (hard) |
| Packing unit | 5 pcs. |
| Material number | 44691053 |
