Products
Special Metal INCOFLUX NT120 Submerged Arc Welding Flux
INCOFLUX NT120 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with the corrosion resistant nickel-chromium-molybdenum-tungsten alloys such as INCONEL Filler Metal 622, INCO-WELD C-276 Filler Metal, and INCO-WELD 686CPT Filler Metal. Typical applications are the groove welding of nickel alloys of a similar composition (eg. C-22, C-276, 59, 686). The flux and wire combinations are also for welding stainless steels (eg. 6% Mo and duplex stainless steels, etc.) and nickel alloys where enhanced weld metal corrosion properties are required through the Ni-Cr-Mo-W filler metals.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
INCOFLUX NT120 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with the corrosion resistant nickel-chromium-molybdenum-tungsten alloys such as INCONEL Filler Metal 622, INCO-WELD C-276 Filler Metal, and INCO-WELD 686CPT Filler Metal. Typical applications are the groove welding of nickel alloys of a similar composition (eg. C-22, C-276, 59, 686). The flux and wire combinations are also for welding stainless steels (eg. 6% Mo and duplex stainless steels, etc.) and nickel alloys where enhanced weld metal corrosion properties are required through the Ni-Cr-Mo-W filler metals.
Welding Parameters
Groove and Overlay Welding using DCEP current and Stringer beads.
| Diameter | Amperes | Volts | Travel Speed | Extension Stick-Out | Flux Depth | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.062 in. 1.6 mm |
240-290 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 in. 19-25 mm |
||||||
| 0.093 in. 2.4 mm |
250-300 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
| Overlay Welding with Oscillation: Use DCEN current and Oscillation Frequency of 50-70 cycles / min for 0.062 in. and 35-50 for 0.093 in. |
|||||||||||
| 0.062 in. 1.6 mm |
240-260 | 32-34 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 in. 19-25 mm |
||||||
| 0.093 in. 2.4 mm |
300-400 | 34-37 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
Specification
EN 760 – S A AF2
Particle Size
Tyler Sieves: 10 x 60 Mesh (0.25 mm x 2.0 mm), EN 760 2-20
Packaging
60 pound (27.22 kg) Polyethylene Bucket with a hermetically sealed lid that has a rubber gasket seal.
Enquiry about Special Metal INCOFLUX NT120 Submerged Arc Welding Flux
Description
INCOFLUX NT120 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with the corrosion resistant nickel-chromium-molybdenum-tungsten alloys such as INCONEL Filler Metal 622, INCO-WELD C-276 Filler Metal, and INCO-WELD 686CPT Filler Metal. Typical applications are the groove welding of nickel alloys of a similar composition (eg. C-22, C-276, 59, 686). The flux and wire combinations are also for welding stainless steels (eg. 6% Mo and duplex stainless steels, etc.) and nickel alloys where enhanced weld metal corrosion properties are required through the Ni-Cr-Mo-W filler metals.
Welding Parameters
Groove and Overlay Welding using DCEP current and Stringer beads.
| Diameter | Amperes | Volts | Travel Speed | Extension Stick-Out | Flux Depth | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.062 in. 1.6 mm |
240-290 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 in. 19-25 mm |
||||||
| 0.093 in. 2.4 mm |
250-300 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
| Overlay Welding with Oscillation: Use DCEN current and Oscillation Frequency of 50-70 cycles / min for 0.062 in. and 35-50 for 0.093 in. |
|||||||||||
| 0.062 in. 1.6 mm |
240-260 | 32-34 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 in. 19-25 mm |
||||||
| 0.093 in. 2.4 mm |
300-400 | 34-37 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
Specification
EN 760 – S A AF2
Particle Size
Tyler Sieves: 10 x 60 Mesh (0.25 mm x 2.0 mm), EN 760 2-20
Packaging
60 pound (27.22 kg) Polyethylene Bucket with a hermetically sealed lid that has a rubber gasket seal.
