Products
PFRED COMBIDISC Non-woven Discs Hard Type VRH CDR System
Suitable for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work.
Achieve matt and satin-finished surfaces.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
Description
Suitable for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work.
Achieve matt and satin-finished surfaces.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Weld dressing
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Flexible shaft drive
- Straight grinder
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | EAB818c011 |
| eclass 8.1 | 21011318 |
| eclass 7.0 | 21011318 |
| eclass 4.1 | 21011304 |
Recommendations for use
- The addition of oil or water during grinding results in a finer finish, cooler grinding and longer tool life.
Specifications
Technical information
| Opt. RPM from | 7000 RPM |
| Opt. RPM to | 10000 RPM |
| Outer dia. | 38 mm |
| Grit size | 100 G |
| Packing unit | 50 pcs. |
| Material number | 42781381 |
Enquiry about PFRED COMBIDISC Non-woven Discs Hard Type VRH CDR System
Description
Description
Suitable for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work.
Achieve matt and satin-finished surfaces.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Weld dressing
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Flexible shaft drive
- Straight grinder
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | EAB818c011 |
| eclass 8.1 | 21011318 |
| eclass 7.0 | 21011318 |
| eclass 4.1 | 21011304 |
Recommendations for use
- The addition of oil or water during grinding results in a finer finish, cooler grinding and longer tool life.
Specifications
Technical information
| Opt. RPM from | 7000 RPM |
| Opt. RPM to | 10000 RPM |
| Outer dia. | 38 mm |
| Grit size | 100 G |
| Packing unit | 50 pcs. |
| Material number | 42781381 |
