Products
PFRED COMBIDISC Non-woven Discs PNER Type CDR System
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Particularly suitable for work on small and medium-sized surfaces of stainless steel (INOX) components.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
Description
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Particularly suitable for work on small and medium-sized surfaces of stainless steel (INOX) components.
The different thicknesses/hardnesses of the non-woven material are colour-coded:
W (soft) = grey
MH (medium-hard) = dark blue
H (hard) = red
Further information on non-woven products in the PNER type can be found on pages 99–100.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Weld dressing
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Flexible shaft drive
- Straight grinder
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | EAB818c011 |
| eclass 8.1 | 21011315 |
| eclass 7.0 | 21011318 |
| eclass 4.1 | 21011304 |
Specifications
Technical information
| Opt. RPM from | 9500 RPM |
| Max. RPM | 19100 RPM |
| Outer dia. | 50 mm |
| Type | soft |
| Abrasives | A |
| Grit size | G (coarse) |
| Packing unit | 25 pcs. |
| Material number | 42779021 |
Enquiry about PFRED COMBIDISC Non-woven Discs PNER Type CDR System
Description
Description
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Particularly suitable for work on small and medium-sized surfaces of stainless steel (INOX) components.
The different thicknesses/hardnesses of the non-woven material are colour-coded:
W (soft) = grey
MH (medium-hard) = dark blue
H (hard) = red
Further information on non-woven products in the PNER type can be found on pages 99–100.
Materials that can be worked:
- Aluminium
- Cobalt-based alloys
- Other non-ferrous metals
- High-temperature-resistant materials
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Bronze
- Hard non-ferrous metal
- Titanium
- Titanium alloys
- Copper
- Soft non-ferrous metal
- Brass
- Stainless steel (INOX)
- Thermoplastics
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
Applications:
- Roughening
- Deburring
- Surface work
- Cleaning
- Weld dressing
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:
- Flexible shaft drive
- Straight grinder
- Angle grinder
- Cordless angle grinder
Classification
| profi class 5.0 | EAB818c011 |
| eclass 8.1 | 21011315 |
| eclass 7.0 | 21011318 |
| eclass 4.1 | 21011304 |
Specifications
Technical information
| Opt. RPM from | 9500 RPM |
| Max. RPM | 19100 RPM |
| Outer dia. | 50 mm |
| Type | soft |
| Abrasives | A |
| Grit size | G (coarse) |
| Packing unit | 25 pcs. |
| Material number | 42779021 |
