Products
Hypertherm Maxpro 200 Heavy Duty High Capacity Plasma System
The MAXPRO200® LongLife® plasma cutting system is engineered for heavy-duty, high capacity automated and handheld cutting and gouging applications. The easy-to-use system operates with either air, oxygen, or nitrogen plasma gas, and combines fast cutting speeds and quick process changes to maximize productivity. Advanced Hypertherm consumable designs – including LongLife® technology – improve cut consistency and significantly increase consumable life to lower your cost per part.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
Benefits
Maximized productivity
- Fastest cut speeds in its class produce more finished parts per hour
- Engineered with 100% duty cycle for the most demanding production environments.
- Automatic settings, tool free leads and optional quick disconnect torches let you quickly transition between cutting, gouging, mechanized and handheld processes
- Superior cut quality and consistency minimize the need for costly secondary operations
Fast cutting speeds = maximum productivity
Easy operation
- Optimized cutting parameters are automatically set and controlled in one step to deliver consistent results without operator intervention
- Advanced diagnostics simplify troubleshooting and service
- Optional serial communications allow full control of the system from the CNC
Low operating cost
- Patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels
- Advanced consumable technologies including LongLife, CoolFlow™ and TrueFlow™ significantly increase consumable life to reduce cost per part
Industry-leading reliability
- Robust, simple system architecture with 50% fewer parts than most competitive systems
- Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards
Technical Data
Specifications
| Input voltages | 200/208 VAC, 3-PH, 50 Hz, 108/104 A 220 VAC, 3-PH, 50 – 60 Hz, 98 A 240 VAC, 3-PH, 60 Hz, 90 A 380 VAC, 3-PH, 50 Hz, 57 A 400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A 415 VAC, CE, 3-PH, 50 Hz, 52 A 440 VAC, 3-PH, 50 – 60 Hz, 49 A 480 VAC, 3-PH, 60 Hz, 45 A 600 VAC, 3-PH, 60 Hz, 36 A |
|---|---|
| Output voltage | 50 – 165 VDC |
| Maximum output current | 200 A |
| Duty cycle rating | 100% @ 33 kW, at 40° C (104° F) |
| Operating temperature | -10° C to 40° C (+14° F to +104° F) |
| Power factor | 0.98 @ 33 kW output |
| Maximum OCV | 360 VDC |
| Dimensions | 102 cm (40.14″) H, 69 cm (27.12″) W, 105 cm (41.23″) L |
| Weight | 335 kg (740 lbs) |
| Gas supply Plasma gas Shield gas Supply gas pressure |
Air, O2, N2 Air, N2 6.2 +/- 0.7 bar (90 +/- 10 psig) |
Operation Data
Operation Data
- Virtually dross-free cutting capacity – mild steel 20 mm (3/4″)
- Production pierce capacity – mild steel 32 mm (1 1/4″)
- Severance* – mild steel 75 mm (3″)
- Bevel – 200 amp consumables support 45° bevel capability
| Material | Current (amps) |
Thickness (mm) |
Approx. cutting speed (mm/min) |
Thickness (inches) |
Approx. cutting speed (ipm) |
|---|---|---|---|---|---|
| Mild steel Air plasma Air shield |
50 |
1
3 |
8050
3760 |
20 ga
0.135 |
340
110 |
| Air plasma
Air shield |
130 | 6
12 |
3865
2045 |
1/4
1/2 |
150
75 |
| Air plasma
Air shield |
200 | 6
12 20 25 32 50 |
4885
2794 1415 940 630 215 |
1/4
1/2 3/4 1 1 1/4 2 |
190
110 60 35 25 8 |
| O2 plasma
Air shield |
50 | 1
3 |
6775
3650 |
20 ga
0.135 |
270
130 |
| O2 plasma
Air shield |
130 | 6
12 |
3925
2200 |
1/4
1/2 |
150
80 |
| O2 plasma
Air shield |
200 | 6
12 20 25 32 50 |
6210
3415 1920 1430 805 270 |
1/4
1/2 3/4 1 1 1/4 2 |
235
130 80 55 32 10 |
| Stainless steelN2 plasma
N2 shield |
200 |
12
20 |
2260
1140 |
1/2
3/4 |
80
50 |
| Air plasma
Air shield |
200 | 12
20 |
3050
1520 |
1/2
3/4 |
120
60 |
| AluminumN2 plasma
N2 shield |
200 |
12
20 |
3370
1630 |
1/2
3/4 |
125
70 |
| Air plasma
Air shield |
200 | 12
20 |
3370
1625 |
1/2
3/4 |
125
70 |
*The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality. Cutting at severance thickness should be infrequent.
Enquiry about Hypertherm Maxpro 200 Heavy Duty High Capacity Plasma System
Description
Benefits
Maximized productivity
- Fastest cut speeds in its class produce more finished parts per hour
- Engineered with 100% duty cycle for the most demanding production environments.
- Automatic settings, tool free leads and optional quick disconnect torches let you quickly transition between cutting, gouging, mechanized and handheld processes
- Superior cut quality and consistency minimize the need for costly secondary operations
Fast cutting speeds = maximum productivity
Easy operation
- Optimized cutting parameters are automatically set and controlled in one step to deliver consistent results without operator intervention
- Advanced diagnostics simplify troubleshooting and service
- Optional serial communications allow full control of the system from the CNC
Low operating cost
- Patented consumable designs enable best in class cut speeds and robust production piercing using lower amperage levels
- Advanced consumable technologies including LongLife, CoolFlow™ and TrueFlow™ significantly increase consumable life to reduce cost per part
Industry-leading reliability
- Robust, simple system architecture with 50% fewer parts than most competitive systems
- Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards
Technical Data
Specifications
| Input voltages | 200/208 VAC, 3-PH, 50 Hz, 108/104 A 220 VAC, 3-PH, 50 – 60 Hz, 98 A 240 VAC, 3-PH, 60 Hz, 90 A 380 VAC, 3-PH, 50 Hz, 57 A 400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A 415 VAC, CE, 3-PH, 50 Hz, 52 A 440 VAC, 3-PH, 50 – 60 Hz, 49 A 480 VAC, 3-PH, 60 Hz, 45 A 600 VAC, 3-PH, 60 Hz, 36 A |
|---|---|
| Output voltage | 50 – 165 VDC |
| Maximum output current | 200 A |
| Duty cycle rating | 100% @ 33 kW, at 40° C (104° F) |
| Operating temperature | -10° C to 40° C (+14° F to +104° F) |
| Power factor | 0.98 @ 33 kW output |
| Maximum OCV | 360 VDC |
| Dimensions | 102 cm (40.14″) H, 69 cm (27.12″) W, 105 cm (41.23″) L |
| Weight | 335 kg (740 lbs) |
| Gas supply Plasma gas Shield gas Supply gas pressure |
Air, O2, N2 Air, N2 6.2 +/- 0.7 bar (90 +/- 10 psig) |
Operation Data
Operation Data
- Virtually dross-free cutting capacity – mild steel 20 mm (3/4″)
- Production pierce capacity – mild steel 32 mm (1 1/4″)
- Severance* – mild steel 75 mm (3″)
- Bevel – 200 amp consumables support 45° bevel capability
| Material | Current (amps) |
Thickness (mm) |
Approx. cutting speed (mm/min) |
Thickness (inches) |
Approx. cutting speed (ipm) |
|---|---|---|---|---|---|
| Mild steel Air plasma Air shield |
50 |
1
3 |
8050
3760 |
20 ga
0.135 |
340
110 |
| Air plasma
Air shield |
130 | 6
12 |
3865
2045 |
1/4
1/2 |
150
75 |
| Air plasma
Air shield |
200 | 6
12 20 25 32 50 |
4885
2794 1415 940 630 215 |
1/4
1/2 3/4 1 1 1/4 2 |
190
110 60 35 25 8 |
| O2 plasma
Air shield |
50 | 1
3 |
6775
3650 |
20 ga
0.135 |
270
130 |
| O2 plasma
Air shield |
130 | 6
12 |
3925
2200 |
1/4
1/2 |
150
80 |
| O2 plasma
Air shield |
200 | 6
12 20 25 32 50 |
6210
3415 1920 1430 805 270 |
1/4
1/2 3/4 1 1 1/4 2 |
235
130 80 55 32 10 |
| Stainless steelN2 plasma
N2 shield |
200 |
12
20 |
2260
1140 |
1/2
3/4 |
80
50 |
| Air plasma
Air shield |
200 | 12
20 |
3050
1520 |
1/2
3/4 |
120
60 |
| AluminumN2 plasma
N2 shield |
200 |
12
20 |
3370
1630 |
1/2
3/4 |
125
70 |
| Air plasma
Air shield |
200 | 12
20 |
3370
1625 |
1/2
3/4 |
125
70 |
*The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality. Cutting at severance thickness should be infrequent.
