Products
Special Metal INCOFLUX NT110 Submerged Arc Welding Flux
INCOFLUX NT110 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with MONEL Filler Metal 60 (70% Ni, 30% Cu) and MONEL Filler Metal 67 (70% Cu, 30% Ni). Typical applications with MONEL Filler Metal 60 are groove welding MONEL alloy 400 to itself and to ferritic materials. A major application is for overlaying carbon steels with the corrosion resistant MONEL Filler Metal 60. The flux is used with MONEL Filler Metal 67 to join Copper-Nickel alloys (90/10, 80/20 and 70/30). Overlays on ferritic steels require a buffer layer of Nickel 61 or MONEL 60.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
INCOFLUX NT110 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with MONEL Filler Metal 60 (70% Ni, 30% Cu) and MONEL Filler Metal 67 (70% Cu, 30% Ni). Typical applications with MONEL Filler Metal 60 are groove welding MONEL alloy 400 to itself and to ferritic materials. A major application is for overlaying carbon steels with the corrosion resistant MONEL Filler Metal 60. The flux is used with MONEL Filler Metal 67 to join Copper-Nickel alloys (90/10, 80/20 and 70/30). Overlays on ferritic steels require a buffer layer of Nickel 61 or MONEL 60.
Welding Parameters
Groove and Overlay Welding using DCEP current and Stringer beads.
Diameter | Amperes | Volts | Travel Speed | Extension Stick-Out | Flux Depth | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.062 in. 1.6 mm |
260-280 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/2 in. 19-25 mm |
||||||
0.093 in. 2.4 mm |
300-350 | 32-35 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
Overlay Welding with Oscillation: Use DCEN current and Oscillation Frequency of 50-70 cycles / min for 0.062 in. and 35-50 for 0.093 in. |
|||||||||||
0.062 in. 1.6 mm |
260-280 | 32-35 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
1/2-1 in. 19-25 mm |
||||||
0.093 in. 2.4 mm |
300-400 | 34-37 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
Specification
EN 760 – S A FB2
Particle Size
Tyler Sieves: 10 x 60 Mesh (0.25 mm x 2.0 mm), EN 760 2-20
Packaging
60 pound (27.22 kg) Polyethylene Bucket with a hermetically sealed lid that has a rubber gasket seal.
Enquiry about Special Metal INCOFLUX NT110 Submerged Arc Welding Flux
Description
INCOFLUX NT110 is an agglomerated Submerged Arc Welding (SAW) Flux for wire welding with MONEL Filler Metal 60 (70% Ni, 30% Cu) and MONEL Filler Metal 67 (70% Cu, 30% Ni). Typical applications with MONEL Filler Metal 60 are groove welding MONEL alloy 400 to itself and to ferritic materials. A major application is for overlaying carbon steels with the corrosion resistant MONEL Filler Metal 60. The flux is used with MONEL Filler Metal 67 to join Copper-Nickel alloys (90/10, 80/20 and 70/30). Overlays on ferritic steels require a buffer layer of Nickel 61 or MONEL 60.
Welding Parameters
Groove and Overlay Welding using DCEP current and Stringer beads.
Diameter | Amperes | Volts | Travel Speed | Extension Stick-Out | Flux Depth | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.062 in. 1.6 mm |
260-280 | 30-33 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/2 in. 19-25 mm |
||||||
0.093 in. 2.4 mm |
300-350 | 32-35 | 8-11 in./min. 200-280 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
||||||
Overlay Welding with Oscillation: Use DCEN current and Oscillation Frequency of 50-70 cycles / min for 0.062 in. and 35-50 for 0.093 in. |
|||||||||||
0.062 in. 1.6 mm |
260-280 | 32-35 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
1/2-1 in. 19-25 mm |
||||||
0.093 in. 2.4 mm |
300-400 | 34-37 | 4 in./min. 100 mm/min. |
7/8-1 in. 22-25 mm |
3/4-1 1/4 in. 19-32 mm |
Specification
EN 760 – S A FB2
Particle Size
Tyler Sieves: 10 x 60 Mesh (0.25 mm x 2.0 mm), EN 760 2-20
Packaging
60 pound (27.22 kg) Polyethylene Bucket with a hermetically sealed lid that has a rubber gasket seal.