Products
OTC Daihen External Axis Positioner 1PB250
OTC Daihen Positioner Headstock – 1PB Series. This can be used to build varied jig systems with a large degree of positioning flexibility. A hole through the center of the rotary table, enabling cables and hoses to be routed through easily.
Please contact us for further inquiries including product variety, replacement parts and product details.Description
OTC Daihen External Axis Positioner 1PB250
Features:
- The 5 sides of the housing are provided with tapped holes, which permit random mounting positions allowing various jig systems to be set up
- A hole through the center of the rotary table enables easy routing of cables and hoses
- A secondary terminal for welding (500A) is provided as standard built-in equipment
- Can be used as a single-axis, double support positioner in combination with the tailstock and stand (optional)
- Application signal cable and 4 air inlet ports can be fed through the center of the table (optional)
- Voltage detection wire and connection terminal to let the low spatter welding power supply DL350 to perform optimally are provided as standard
Specification
| Model Name | A2PB252-E |
| Max. Payload Capacity | 250 kg |
| Rotating Speed | 2.6 rad/s {150° /s} |
| Allowable Rotating Speed | 206 N . M |
| Position Repeatability | ~0.1mm (Position at R300mm) |
| Stop Position | Random |
| Weight | 110kg |
Catalogue
Loading...
Reload document 
Open in new tab Enquiry about OTC Daihen External Axis Positioner 1PB250
Description
OTC Daihen External Axis Positioner 1PB250
Features:
- The 5 sides of the housing are provided with tapped holes, which permit random mounting positions allowing various jig systems to be set up
- A hole through the center of the rotary table enables easy routing of cables and hoses
- A secondary terminal for welding (500A) is provided as standard built-in equipment
- Can be used as a single-axis, double support positioner in combination with the tailstock and stand (optional)
- Application signal cable and 4 air inlet ports can be fed through the center of the table (optional)
- Voltage detection wire and connection terminal to let the low spatter welding power supply DL350 to perform optimally are provided as standard
Specification
| Model Name | A2PB252-E |
| Max. Payload Capacity | 250 kg |
| Rotating Speed | 2.6 rad/s {150° /s} |
| Allowable Rotating Speed | 206 N . M |
| Position Repeatability | ~0.1mm (Position at R300mm) |
| Stop Position | Random |
| Weight | 110kg |
Catalogue
Loading...
